Download Dsl 2750u Me 1.30
Download === https://shurll.com/2tySMY
How to Download and Install DSL 2750U ME 1.30 Firmware
If you have a D-Link DSL 2750U Wireless N 300 ADSL2+ Modem Router, you may want to update its firmware to the latest version. Firmware is the software that runs on your router and controls its features and performance. Updating the firmware can improve your router's stability, security, and compatibility with new devices.
In this article, we will show you how to download and install DSL 2750U ME 1.30 firmware, which is the official firmware for the Middle East and EU regions. This firmware is compatible with DSL 2750U hardware version C1 only. Do not install this firmware on other hardware versions or regions, as it may cause problems or void your warranty.
Step 1: Download the Firmware File
The first step is to download the firmware file from the D-Link website. You can find it at http://www.dlinkmea.com/site/Index.php/site/productDetails/232. Click on the \"Download\" tab and select \"Firmware\" from the drop-down menu. You should see a file named \"DSL-2750U_ME_1.30.zip\". Click on it and save it to your computer.
Step 2: Unzip the Firmware File
The next step is to unzip the firmware file using a program like WinZip or WinRAR. You should see a folder named \"DSL-2750U_ME_1.30\" with two files inside: \"DSL-2750U_ME_1.30.bin\" and \"Release Note.pdf\". The first file is the firmware file and the second file is the release note that contains information about the firmware update.
Step 3: Connect Your Computer to Your Router
The third step is to connect your computer to your router using an Ethernet cable. Do not use a wireless connection, as it may be unstable or interrupted during the firmware update process. Plug one end of the cable into one of the LAN ports on your router and the other end into your computer's Ethernet port.
Step 4: Access Your Router's Web Interface
The fourth step is to access your router's web interface using a web browser like Chrome or Firefox. Open your browser and type http://192.168.1.1 in the address bar and press Enter. You should see a login page asking for your username and password. The default username is \"admin\" and the default password is \"admin\". Enter them and click \"Login\". You should see your router's web interface with various settings and options.
Step 5: Backup Your Router's Settings
The fifth step is to backup your router's settings before updating the firmware. This is optional but recommended, as it will allow you to restore your settings in case something goes wrong during or after the firmware update. To backup your settings, go to \"Maintenance\" > \"Backup/Restore Settings\" on the left menu. Click on \"Backup Settings\" and save the file to your computer.
Step 6: Update Your Router's Firmware
The sixth and final step is to update your router's firmware using the file you downloaded and unzipped earlier. To update your firmware, go to \"Maintenance\" > \"Firmware Update\" on the left menu. Click on \"Browse\" and locate the file \"DSL-2750U_ME_1.30.bin\" on your computer. Select it and click \"Open\". Then click on \"Update Firmware\" and wait for the process to complete.
Do not turn off or unplug your router or computer during the firmware update process, as it may damage your router or cause it to malfunction. The firmware update may take several minutes to complete. When it is done, you should see a message saying \"Firmware Update Successful\". Your router will then reboot automatically.
Congratulations! You have successfully downloaded and installed DSL 2750U ME 1.30 firmware on your D-Link DSL 2750U 061ffe29dd